> Christmas General >

Santa in the Sky Springerle Cookie Mold
Santa In The Sky Springerle Cookie Mold
 
Alternative Views:


$41.00
Custom Cutter(s): 17044

Stock Status:In Stock
Product Code: 1094
Qty:

Description Technical Specs
 
This Santa cookie mold is one of the most detailed in our collection. You can see the antlers of the deer, the stars in the sky, even the cross on the top of the church.

This antique cookie mold reproduction is made of a food-safe resin that is unbreakable and waterproof. It comes with metal eyelet hanger attached at the top for display on a wall. In addition to making cookies, you can make ornaments using this mold (we recommend non-toxic modeling materials such as Paperclay or Delight).

Recommended dough thickness: 8 mm using our Dough Thickness Guides

Recommended cutter: 17044

Baking Tips:
To avoid bubbles using this mold with a springerle recipe, bake this cookie at no higher than 290 degrees F. ("Slow and Low", as we say.) At about 10 minutes, take the tray out of the oven and check the top of each cookie for any hint of a bubble by pressing gently on the top with a hot pad or one layer of a kitchen towel. Avoid using your bare hand. If you detect any "give", gently press the image down to bind it to the moist middle of the cookie. Repeat this every three-four minutes until the cookies are slightly golden brown on the bottoms (15-20 minutes total baking time).

Take them out of the oven, and continue pressing on the tops for about 5 minutes as they cool on the cookie sheet.

This is a technique that we use all the time with intricately carved molds like this one to avoid cracks.


Accessories
Oval Fluted Cookie Cutter 104 mm x 83 mm Oval Cutter: 3.875 x 3.125 in /100 mm x 86 mm Stainless Steel Bench Scraper/Dough Cutter with Ruler Edge Wooden Dough Thickness Guides
$6.50
$7.00
$8.50
$12.00
Oval Fluted Cookie Cutter 104 mm x 83 mm Oval Cutter, 3.875x 3.125 in (100 mm x 86 mm), Stainless Steel (Ateco) Stainless Steel Bench Scraper and Dough Cutter Dough Thickness Guides
Sharp Zig-Zag Edge Cutter: 1.5 in dia
$7.50
Sharp Zig-Zag Edge Cutter, 1.5 in dia

Average Rating: 5 of 5 Total Reviews: 17 Write a review »

  0 of 0 people found the following review helpful:
 
November 13, 2017
Reviewer: Debora Broderson from Portland, ME United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
November 9, 2017
Reviewer: Farida Battalova from Kitchener, ON Canada  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Santa in the Sky August 2, 2017
Reviewer: Gladys Peltomaki from Albuquerque, NM United States  
This mold is remarkable in its design and detail.  The shipping was as quick as if Santa had delivered it himself. I am a huge fan of the Springerle molds. Getting reminders about the availability of molds is so helpful. I am a devoted shopper.  Thank you for exceptional customer service.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Santa in the Sky cookie mold July 26, 2017
Reviewer: Carol Bogdanowicz from Allen, TX United States  
I ordered this mold before Christmas last year and when I used it, I could hardly see the design.  This mold doesn't seem to be cut deep enough to produce the picture on the cookie.  Do you think I received a defective mold because everyone else seems to be very happy with it according to the other reviews.  Debating whether I can still return it/exchange it for another one.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Beautiful mold December 27, 2016
Reviewer: Joyce Kochman from Commack , NY United States  
I love this mold. My grandchildren loved seeing santa in the sky.

Was this review helpful to you?

View All Customer Reviews